LiNbO₃ Wafers 2inch-8inch Kauri 0.1 ~ 0.5mm TTV 3µm Custom

LiNbO₃ Wafers 2inch-8inch Kauri 0.1 ~ 0.5mm TTV 3µm Hoton da aka Fitar da Al'ada

Takaitaccen Bayani:

LiNbO₃ Wafers suna wakiltar ma'aunin gwal a cikin haɗe-haɗen hotunan hoto da madaidaicin acoustics, suna ba da aiki mara misaltuwa a cikin tsarin optoelectronic na zamani. A matsayinmu na ƙwararrun masana'anta, mun kammala fasahar samar da waɗannan injiniyoyin injiniyoyi ta hanyar ci-gaba da dabarun daidaita jigilar tururi, cimma kamalar manyan masana'antu tare da ƙarancin ƙarancin ƙasa 50/cm².

Ƙarfin samar da XKH ya kai diamita daga 75mm zuwa 150mm, tare da daidaitaccen kulawar daidaitawa (X/Y/Z-cut ± 0.3 °) da zaɓuɓɓukan doping na musamman ciki har da abubuwan da ba kasafai ba. Haɗin keɓancewar kaddarorin a cikin LiNbO₃ Wafers - gami da ƙimar ƙimar r₃₃ na ban mamaki (32 ± 2 pm / V) da fa'ida mai fa'ida daga kusa-UV zuwa tsakiyar IR - ya sa su zama makawa don da'irori na photonic na gaba da na'urori masu sauti masu tsayi.

Aika mana imel

Siffofin

Siffofin fasaha

Kayan abu	LiNbO3 wafes na gani na gani
Curie Temp	1142 ± 2.0 ℃
Yanke kusurwa	X/Y/Z da dai sauransu
Diamita/girma	2"/3"/4"/6"/8"
Tol(±)	<0.20 mm
Kauri	0.1 ~ 0.5mm ko fiye
Filayen Firamare	16mm/22mm/32mm
TTV	<3µm
Ruku'u	-30
Warp	<40µm
Hannun Hannu Flat	Duk akwai
Nau'in saman	Goge Gefe Guda Guda / Goge Gefe Biyu
Goge Ra	<0.5nm
S/D	20/10
Ma'auni na Edge	R=0.2mm ko Bullnose
Optical doped	Fe/Zn/MgO da dai sauransu don darajar gani LN< wafers
Wafer Surface Ma'auni	Indexididdigar refractive	No=2.2878/Ne=2.2033 @632nm tsawo
	gurbacewa,	Babu
	Barbashi ￠>0.3 µ m	<= 30
	Tsara, Chipping	Babu
	Lalabi	Babu tsagewar gefe, karce, alamun gani, tabo
Marufi	Akwatin Qty/Wafer	25pcs kowane akwati

Babban Halayen Wafers ɗinmu na LiNbo₃

1.Halayen Ayyukan Hoto

Wafers ɗin mu na LiNbO₃ suna nuna ƙarfin hulɗar al'amura masu haske na ban mamaki, tare da ƙididdiga na gani marasa kan layi wanda ya kai 42 pm/V - yana ba da ingantaccen tsarin jujjuya tsayin raƙuman ruwa mai mahimmanci ga ƙididdiga na photonics. Abubuwan da ake amfani da su suna kula da> 72% watsawa a cikin 320-5200nm, tare da nau'ikan injiniyoyi na musamman suna samun asarar <0.2dB/cm akan haɓakar haɓakar telecom.

2.Acoustic Wave Engineering

Tsarin lu'ulu'u na LiNbO₃ Wafers ɗinmu yana goyan bayan saurin igiyar ruwa sama da 3800 m/s, yana ba da izinin aikin resonator har zuwa 12GHz. Dabarun gogewa na mallakarmu na samar da na'urori masu faɗakarwa (SAW) tare da asarar sakawa a ƙarƙashin 1.2dB, yayin da ke kiyaye kwanciyar hankali tsakanin ± 15ppm/°C.

3.Tsarin Muhalli

Injiniya don jure matsanancin yanayi, LiNbO₃ Wafers ɗinmu suna kula da aiki daga yanayin zafi na cryogenic zuwa yanayin aiki na 500°C. Kayan yana nuna taurin radiation na musamman, jurewa> 1Mrad jimlar ionizing kashi ba tare da raguwar aiki mai mahimmanci ba.

4.Application-Specific Configuration

Muna ba da bambance-bambancen injiniyan yanki gami da:
Tsare-tsare na lokaci-lokaci tare da lokutan yanki na 5-50μm
ion-yankakken fina-finai na bakin ciki don haɗin kai
Sigar haɓakar metamaterial don aikace-aikace na musamman

Yanayin Aiwatar don LiNbO₃ Wafers

1.Next-Gen Optical Networks
LiNbO₃ Wafers suna aiki azaman kashin baya don masu ɗaukar hoto na sikelin terabit, yana ba da damar watsa daidaitaccen 800Gbps ta hanyar ƙirar ƙirar ƙirar ƙira. Ana ƙara ɗaukar kayan aikin mu don aiwatar da kayan aikin haɗin gwiwa a cikin tsarin haɓaka AI/ML.
2.6G RF Frontends
Sabbin ƙarni na LiNbO₃ Wafers suna goyan bayan tacewa mai fa'ida har zuwa 20GHz, yana magance buƙatun buƙatun buƙatun 6G masu tasowa. Kayan mu yana ba da damar fasahar resonator na zamani tare da abubuwan Q da suka wuce 2000.
3.Kwantam Information Systems
Madaidaicin-Poled LiNbO₃ Wafers sune tushen tushen tushen photon tare da> 90% ingantaccen ƙarni na biyu. Abubuwan da muke amfani da su suna ba da damar ci gaba a cikin ƙididdigar adadin photonic da amintattun hanyoyin sadarwar sadarwa.
4.Advanced Sensing Solutions
Daga LiDAR na kera motoci da ke aiki a 1550nm zuwa na'urori masu auna nauyi mai nauyi, LiNbO₃ Wafers suna ba da mahimmancin dandamalin watsawa. Kayan mu yana ba da damar ƙudurin firikwensin har zuwa matakan gano kwayoyin halitta guda ɗaya.

Muhimman Fa'idodin LiNbO₃Wafers

1. Ayyukan Electro-Optic mara misaltuwa
Na Musamman High Electro-Optic Coefficient (r₃₃ ~ 30-32 pm / V): Yana wakiltar ma'aunin masana'antu don kasuwancin lithium niobate wafers, yana ba da damar 200Gbps + masu saurin gani mai saurin gani wanda ya wuce iyakokin aiki na tushen silicon ko mafita na polymer.

Ultra-low asarar (<0.1 DB / cm): An samu ta hanyar Nanoscale Polishing (Ra <.3 NM) da anti-powing (Ra <.3) da anti-tunani (da kyau inganta ƙarfin makamashi na ingantaccen tsarin sadarwa.

2. Mafi Girma Piezoelectric & Acoustic Properties
Mafi dacewa don Na'urorin SAW/BAW Mai Girma: Tare da saurin sauti na 3500-3800 m/s, waɗannan wafers suna goyan bayan 6G mmWave (24-100 GHz) ƙirar ƙira mai nuna asarar saka <1.0 dB.

High Electromechanical Coupling Coefficient (K² ~ 0.25%): Yana haɓaka bandwidth da zaɓin sigina a cikin sassan gaba-gaba na RF, yana sa su dace da tashoshin tushe na 5G/6G da sadarwar tauraron dan adam.

3. Fassarar Watsa Labarai & Tasirin Na'urar gani mara kyau
Tagar watsawar gani mai-fadi (350-5000 nm): Yana rufe UV zuwa tsakiyar-IR, yana ba da damar aikace-aikace kamar:

Quantum Optics: Tsare-tsare na lokaci-lokaci (PPLN) sun cimma nasara> 90% inganci a cikin tsararrun nau'ikan photon.

Tsarin Laser: Oscillation na gani na gani na gani (OPO) yana ba da fitarwa mai tsayin tsayi (1-10 μm).

Ƙarfin Lalacewar Laser na Musamman (> 1 GW/cm²): Ya dace da ƙaƙƙarfan buƙatu don aikace-aikacen Laser mai ƙarfi.

4. Matsanancin Zaman Lafiyar Muhalli
Juriya mai tsayi mai tsayi (Ma'anar Curie: 1140°C): Yana riƙe da ingantaccen aiki tsakanin -200°C zuwa +500°C, manufa don:

Automotive Electronics (na'urori masu auna firikwensin inji)

Jirgin sama (zurfin abubuwan gani na gani)

Taurin Radiation (> 1 Mista TID): Mai bin ka'idodin MIL-STD-883, wanda ya dace da kayan lantarki da na tsaro.

5. Daidaitawa & Haɗin kai
Crystal Orientation & Inganta Doping:

Wafers-yanken X/Y/Z (± 0.3° daidaici)

MgO doping (5 mol%) don ingantaccen juriyar lalacewar gani

Taimakon Haɗin Kai Daban-daban:

Mai jituwa tare da bakin ciki-fim LiNbO₃-on-Insulator (LNOI) don haɗin kai tare da silicon photonics (SiPh)

Yana ba da damar haɗin kai-matakin wafer don abubuwan haɗin haɗin gwiwa (CPO)

6. Ƙirƙirar Ƙarfafawa & Ƙarfin Kuɗi
6-inch (150mm) Wafer Mass Production: Yana rage farashin naúrar da 30% idan aka kwatanta da tsarin 4-inch na gargajiya.

Isar da sauri: Daidaitaccen samfuran jigilar kayayyaki a cikin makonni 3; ƙananan samfura (mafi ƙarancin wafers 5) suna isar da su cikin kwanaki 10.

Ayyukan XKH

1. Lab Ƙirƙirar Kaya
Kwararrun haɓakar kristal ɗin mu suna haɗin gwiwa tare da abokan ciniki don haɓaka ƙayyadaddun ƙayyadaddun ƙa'idodin Wafers na LiNbO₃, gami da:

Ƙananan bambance-bambancen asarar gani (<0.05dB/cm)

Tsarin sarrafa iko mai ƙarfi

Abubuwan da ke jure wa radiation

2. Bututun Prototyping da sauri
Daga ƙira zuwa bayarwa a cikin kwanakin kasuwanci 10 don:

Wafers daidaitacce

Samfuran lantarki

Samfuran da aka riga aka tsara

3. Takaddar Ayyuka
Kowane jigilar LiNbo₃ Wafer ya haɗa da:

Cikakkun sifofi

Tabbatar da daidaitawar Crystallographic

Tabbacin ingancin saman

4. Tabbacin Sarkar Supply